Obtaining A Self Certificate From A Certificate Authority - NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
• Subject Name. This is the name that other organizations will see as the holder (owner) of this
certificate. This should be your registered business name or official company name. Generally,
all of your certificates should have the same value in the Subject field.
• Serial Number. This is a serial number maintained by the CA. It is used to identify the
certificate with in the CA.
• Issuer Name. The name of the CA that issued the certificate.
• Expiry Time. The date on which the certificate expires. You should renew the certificate
before it expires.

Obtaining a Self Certificate from a Certificate Authority

To use a self certificate, you must first request the certificate from the CA, then download and
activate the certificate on your system. To request a self certificate from a CA, you must generate a
Certificate Signing Request (CSR) for your VPN firewall. The CSR is a file containing
information about your company and about the device that will hold the certificate. Refer to the
CA for guidelines on the information you include in your CSR.
To generate a new Certificate Signing Request (CSR) file:
1. Locate the Generate Self Certificate Request section of the Certificates screen.
Figure 7-12
7-14 Managing Users, Authentication, and Certificates
v1.0, January 2010