2. Getting Started
Guide to Components
• Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If
the machine overheats, a fault might occur.
Front and left view
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
The ADF scans both sides of an original one side at a time.
2. Exposure glass
Place originals face down here.
3. Ventilation holes
Prevent overheating.
4. Main power switch
To operate the machine, the main power switch must be on. If it is off, open the cover and turn the switch on.
30
(mainly North America)
1
2
4
3
5
6
7
8
9
CJS301