Table of Contents
Advertisement
Message
"Exceeded time limit for
LDAP server search. Check
the server status."
"LDAP server authentication
has failed. Check the
settings."
"Memory is full. Cannot
scan. The scanned data will
be deleted."
"Memory is full. Do you
want to store scanned file?"
"Memory is full. Press [Write]
to write the current scanned
data to the memory storage
device, or press [Cancel] to
delete."
Causes
A network error has
occurred and connection
has failed.
The user name and
password differ from those
set for LDAP Authentication.
Because of insufficient hard
disk space, the first page
could not be scanned.
Because there is not enough
free hard disk space in the
machine for storing in the
Document Server, only some
of the pages could be
scanned.
The scan could not be
completed because there
was insufficient hard disk
memory at the time of saving
to the memory device.
When Messages Are Displayed on the Control Panel
Solutions
• Try the operation again. If the
message is still shown, the
network may be busy.
• Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP server", Connecting the
Machine/ System Settings
For details about LDAP Authentication,
see Security Guide
.
Try one of the following measures:
• Wait for a while, and then retry
the scan operation.
• Reduce the scan area or scanning
resolution. For details about
changing scan area and scanning
resolution, see "Scan Settings" of
Various Scan Settings, Scan
• Delete unneeded stored files. For
details about how to delete stored
files, see "Deleting a Stored File",
Scan
.
Specify whether to use the data or not.
Select whether or not to save the
scanned document to the memory
device.
.
.
203
Advertisement
Table of Contents
