Table of Contents
Advertisement
Message
"Exceeded the maximum
unit count for Print Volume
Use. The job has been
cancelled."
"Failed to obtain file
system."
"File system is full."
"HDD is full."
"HDD is full."
"HDD is full. (Auto)"
"I/O buffer overflow."
Causes
The number of pages the
user is permitted to print has
been exceeded.
PDF direct printing could not
be performed because the
file system could not be
obtained.
PDF file does not print out
because the capacity of the
file system is full.
The hard disk became full
while printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file.
When printing with the
PostScript 3 printer driver,
the hard disk capacity for
fonts and forms has been
exceeded.
The hard disk became full
while using the error job
store function to store
Normal Print jobs as Hold
Print files.
An input buffer overflow
occurred.
When Messages Are Displayed on the Control Panel
Solutions
For details about print volume use
limitation, see Security Guide
Turn off the main power switch, and
then back on again. If the message
appears again, contact your service
representative.
Delete all unnecessary files from the
hard disk, or decrease the file size sent
to the machine.
Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of the
Sample Print, Locked Print, Hold Print, or
Stored Print file.
Delete unneeded forms or fonts
registered in the machine.
Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of the
Temporary Print file and/or the Stored
Print file.
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• In [Printer Features], under [Host
Interface], select [I/O Buffer], and
then set the maximum buffer size to
a larger value.
• Reduce the number of files being
sent to the machine.
.
193
Advertisement
Table of Contents
