Table of Contents
Advertisement
Message
"Print overrun."
"Printing privileges have not
been set for this document."
"Punch has been
cancelled."
"Receiving data failed."
"Selected ppr. size is not
supported. Job was
cancelled."
"Sending data failed."
"Staple has been
cancelled."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. memory."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
files."
Causes
Images were discarded
while printing.
The PDF document you
have tried to print has no
privileges to print.
Punch printing was
canceled.
Data reception was
aborted.
Job reset is automatically
performed if the specified
paper size is incorrect.
The machine received a
command to stop
transmission from the printer
driver.
Stapling printing was
canceled.
The hard disk became full
after a file was stored.
The maximum file capacity
of the Document Server was
exceeded.
When Messages Are Displayed on the Control Panel
Solutions
PCL 5e
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
Contact the owner of the document.
Check the paper orientation, print
orientation, and then punch position.
Certain settings can produce print results
that might not be as expected.
Resend the data.
Specify the correct paper size, and then
print the file again.
Check if the computer is working
correctly.
Check the paper orientation, paper
quantity, print orientation, and staple
position. Certain settings can produce
print results that might not be as
expected.
Delete the files stored in the Document
Server or reduce the file size to be sent.
Delete the files stored in the Document
Server.
195
Advertisement
Table of Contents
