Table of Contents
Advertisement
Message
"Original(s) is being
scanned for a different
function."
"Put original back, check it
and press the Start key."
"Remove the paper from
Internal Tray 1."
"Some invalid destination(s)
contained. Do you want to
select only valid
destination(s)?"
"Some page(s) are near
blank. To cancel, press the
Stop key."
Causes
A function of the machine
other than the Facsimile
function is being used such
as the Document Server
function.
Original jammed during
Memory Transmission.
Internal Tray 1 is full.
The specified group contains
fax destinations, e-mail
destinations, and/or folder
destinations, either of which
are incompatible with the
specified transmission
method.
The first page of the
document is almost blank.
When Messages Are Displayed on the Control Panel
Solutions
Before sending a file by fax, cancel the
job in progress. For example, press
[Exit], and then press the [Home] key.
Press the [Document Server] icon on
the [Home] screen. Next, press the
[Stop] key. When the message "The
Stop key has been pressed, scanning,
and also other print jobs that were
being processed and which could be
stopped, have been suspended. To
continue scanning and printing press
[Continue], to cancel scanning press
[Cancel Scanning]. To delete other
suspended jobs press [Job List]."
appears, press [Cancel Scanning].
Press [Exit], and then send the
documents again.
Remove the paper. If the other tray is
also full, the tray name shown on the
screen changes. Remove paper from
the tray indicated on the display.
In the message that appears at each
transmission, press [Select].
The original's blank side might have
been scanned. Be sure to place your
originals correctly. For details about
determining the cause of blank pages,
see "Detecting Blank Pages", Fax
.
175
Advertisement
Table of Contents
