Table of Contents
Advertisement
2.
Select one of the staple positions.
When you select a staple position, Sort is automatically selected.
3.
Press [OK].
4.
Enter the number of copy sets with the number keys.
5.
Place the originals, and then press the [Start] key.
Punch
You can make punch holes in copies.
The available number of punch holes is shown below:
(mainly Europe and Asia): 2 holes, 4 holes
(mainly North America): 2 holes, 3 holes
• You cannot use the bypass tray with this function.
Original orientation and punch hole position
Place all the originals in the ADF in the orientation in which they can be read normally. When
placing the original on the exposure glass, keep the same orientation, but place the original facing
downwards.
CKN022
Finishing
75
Advertisement
Table of Contents
