Startup Process - 3Com MSR 50-40 ROUTER. Installation Manual

3) After completing the power-on self-test (POST), the system asks you to press <Enter>. When the
prompt appears, you may proceed to configure the router.

Startup Process

After being powered on and reboot, the router initializes the memory first:
InitDDR
The system runs the BootROM program when finishing initialization, and then prompts as follows:
system start booting......Version
Press CTRL+D to stop auto-boot9
Press <Ctrl+D> and the system enters the BootROM menu. Otherwise, the system enters the program
decompression process.
Enter <Ctrl+D> within 3 seconds after the "Press CTRL+D to stop auto-boot" appears, and the system
enters basic BootROM menu; otherwise, the system enters the program decompression process of the
extended BootROM menu.
Booting Normal Extended BootRom
Decompressing...done!
Ensure the baudrate is set to 9600bps!Starting at 0xa00000...
*******************************************************
*
*
*
*******************************************************
Copyright(c) 2004-2007
Compiled date: Apr 09 2007, 08:52:28
CPU type
CPU L1 Cache
CPU L2 Cache
CPU Clock Speed : 833MHz
Memory Type
Memory Size
Memory Speed
BootRom Size
CPLD
HardWare Version is
CF Card is Inserted, now is mounting...
MSR50-40 BOOTROM, Version 2.11
: MPC8541
: 32KB
: 256KB
: DDR SDRAM
: 512MB
: 333MHz
: 4096KB
Version is 1.00
3.00
2.11
4-4
*
*
*