Interface Card Module; Installing/Removing Slide Rail; Msr 50 Series Slide Rail - 3Com MSR 50-40 ROUTER. Installation Manual

Figure 3-9 AUX cable
Connecting the AUX cable
Follow these steps to connect the AUX cable.
Step 1: Plug the RJ-45 connector of the cable into the AUX port on the main control board.
Step 2: Plug the DB-25 or DB-9 connector into the serial port on the analog modem.
When using the AUX interface for remote configuration or dial backup, you need to connect the local
modem to the remote modem through PSTN and then to the remote device. For the configuration
procedures, refer to MSR 20/30/50 Series Routers User Manual.

Interface Card Module

The MSR 50 Series Routers are available with various types of interface card modules. For detailed
information, refer to MSR 20/30/50 Series Routers Interface Card and Interface Module Manual.

Installing/Removing Slide Rail

MSR 50 Series Slide Rail

SIC slide rail
Figure 3-10 SIC slide rail
3-11