3Com MSR 50-40 ROUTER. Installation Manual page 19

LED Color
Green &
GE0/1
yellow
RESET
—
2) Console port
Table 1-7 Console port attributes
Attribute
Connector
Interface standard
Baud rate
Function
3) AUX port
Table 1-8 AUX port attributes
Attribute
Connector
Interface standard
Baud rate
Function
4) Ethernet interface
The MPUF provides two 10/100/1000 Mbps Ethernet interfaces that each accommodates an RJ-45
connector and a small form-factor pluggable (SFP) module respectively for electrical and optical
connections. But you can use only one connection at a time.
Five types of 1000Base-FX SFP transceiver modules are available: multi-mode short-haul (850 nm),
single-mode medium-haul (1310 nm), single-mode long-haul (1310 nm), single mode long-haul (1550
nm), and single-mode ultra-long haul (1550 nm). They all provide LC interfaces and are hot swappable.
Number Status
Off
Green
Green, blinking
1
Yellow
Yellow, blinking
— —
RJ-45
RS232
9600 bps to 115200 bps
9600 bps (default)
Connecting to the ASCII terminal
Connecting to the serial interface of the local PC and running
terminal emulation program on the PC.
Command line interface
1-9
No connection is established.
1000 Mbps connection is
established.
Active. GE0/1 is transmitting or
receiving data.
10/100 Mbps connection is
established.
Active. GE0/1 is transmitting or
receiving data.
Reset button
Description
Description
RJ-45
RS232
300 bps to 115200 bps
Modem dialup
Backup
Meaning