3Com MSR 50-40 ROUTER. Installation Manual page 62

Menu item
<5> Modify Serial Interface Parameter
<6> Exit To Main Menu
Enter Ethernet interface submenu
Enter <3> in BootROM menu to enter the Ethernet interface submenu. The system displays:
====================<ETHERNET SUB-MENU>======================
|Note:the operating device is CF Card
| <1> Download Application Program To SDRAM And Run
| <2> Update Main Application File
| <3> Update Backup Application File
| <4> Update Secure Application File
| <5> Change Ethernet Parameter
| <6> Exit To Main Menu
| < Ensure The Parameter Be Modified Before Downloading! >
=============================================================
Enter your choice(1-6):
The menu is defined as follows:
Table 5-5 Enter Ethernet interface submenu
Menu item
<1> Download Application Program To SDRAM
And Run
<2> Update Main Application File
<3> Update Backup Application File
<4> Update Secure Application File
<5> Change Ethernet Parameter
<6> Exit To Main Menu
File control submenu
Enter <4> under the main BootROM menu to enter the file control submenu. Through this submenu, the
system can display application program file type in memory, modify file name and delete files. The
prompt is shown below:
========================<File CONTROL>=======================
|Note:the operating device is CF Card
| <1> Display All File
| <2> Set Application File type
| <3> Set Configuration File type
| <4> Delete File
| <5> Exit To Main Menu
=============================================================
Enter your choice(1-5):
Modify serial interface parameter.
Exit to the main menu.
|
|
|
|
|
|
|
|
Download application program to SDRAM and
run it.
Upgrade the main application file.
Upgrade the backup application file.
Upgrade the secure application file.
Modify Ethernet parameters.
Exit to the main menu.
|
|
|
|
|
|
5-7
Description
Description