Configuration Fundamentals - 3Com MSR 50-40 ROUTER. Installation Manual

cf:/ - Volume is OK
Mount CF Card OK!
CF Card Size:256MBytes
Press Ctrl+B to enter extended boot menu...
Enter <Ctrl+B>, and the system enters the extended BootROM menu; otherwise, the system enters the
program decompression process.
The system enters the Boot extended menu only if <Ctrl+B> is pressed immediately (within six seconds)
after the statement "Press Ctrl+B to enter extended Boot Menu..." appears. Otherwise, you will enter
the program decompression process. To re-enter the Boot extended menu during the decompression
process, you need to reboot the router.
The current starting file is main application file--cf:/main.bin!
The main application file is self-decompressing...
Decompressing...done!
System is starting.....
Ensure the baudrate is set to 9600bps!
Starting at 0x10000...
usrRoot() end
leave BSP
id=0x2000,proc=0xd75bd0
DRV_Time_GetTimeZone return 1
DRV_Time_SetTimeZone return 1
id=0x70000,proc=0xd96bfc...
......
......
......
User interface con0 is available.
Press ENTER or ACTIVATION KEY to get started.
Press <Enter> and the screen displays:
<DEVICE>
This prompt indicates that the router has entered the user view, and now the router can be configured.

Configuration Fundamentals

In general, the configuration steps are as follows:
4-5