Figure 27 Wireless: Wpa(2)-Psk; Table 27 Wireless: Wpa(2)-Psk - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

ZyXEL G-2000 Plus v2 User's Guide

Figure 27 Wireless: WPA(2)-PSK

The following table describes the labels in this screen.

Table 27 Wireless: WPA(2)-PSK

LABEL
Security
WPA Compatible
Pre-Shared Key
ReAuthentication
Timer (in seconds)
Idle Timeout
WPA Group Key
Update Timer
90
DESCRIPTION
Select WPA2-PSK to enable WPA2 authentication with a pre-shared key.
This check box is available only when you select WPA2-PSK as your security
level.
Select this to have both WPA2-PSK and WPA-PSK wireless clients be able to
communicate with the ZyXEL device even when the ZyXEL device is using WPA2-
PSK.
Type a password from 8 to 63 case-sensitive ASCII characters (including spaces
and symbols).
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
The ZyXEL device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the
username and password again before access to the wired network is allowed.
The WPA Group Key Update Timer is the rate at which the AP sends a new
group key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis.
Chapter 6 Wireless LAN