ZyXEL Communications ZyAir G-2000 PlusV2 User Manual page 72

ZyXEL G-2000 Plus v2 User's Guide
Table 18 Time Setting
LABEL
Get from Time
Server
Time Protocol
Time Server
Address
Time Zone Setup
Time Zone
Daylight Savings
Start Date
End Date
Apply
Reset
72
DESCRIPTION
Select this if you would like a time server to update the time on your ZyXEL
device.
Select the time service protocol that your time server uses. Not all time servers
support all protocols, so you may have to check with your ISP/network
administrator or use trial and error to find a protocol that works.
The main difference between protocols is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Enter the IP address or the URL of your time server. Check with your ISP/
network administrator if you are unsure of this information.
Choose the time zone at your location. This sets the time difference between
your time zone and Greenwich Mean Time (GMT).
Select this option if you use daylight savings time. Daylight savings is a period
from late spring to early fall when many countries set their clocks ahead of
normal local time by one hour to give more daytime light in the evening.
Enter the month and day that daylight-savings time starts if you select
Daylight Savings.
Enter the month and day that daylight-savings time ends if you select Daylight
Savings.
Click Apply to save your changes back to the ZyXEL device.
Click Reset to reload the previous configuration for this screen.
Chapter 4 System Screens