Configuring Dynamic Dns; Figure 17 Ddns; Table 16 Ddns - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

4.4 Configuring Dynamic DNS

To change your ZyXEL device's DDNS, click SYSTEM, then the DDNS tab. The screen
appears as shown.

Figure 17 DDNS

The following table describes the labels in this screen.

Table 16 DDNS

LABEL
Enable DDNS
Service Provider
DDNS Type
Host Names 1~3
User Name
Password
Enable Wildcard Option Select the check box to enable DynDNS Wildcard.
Enable off line option
IP Address Update Policy:
Chapter 4 System Screens
DESCRIPTION
Select this check box to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Enter the host names in the three fields provided. You can specify up to two
host names in each field separated by a comma (",").
Enter your user name.
Enter the password assigned to you.
This option is available when CustomDNS is selected in the DDNS Type
field. Check with your Dynamic DNS service provider to have traffic
redirected to a URL (that you can specify) while you are off line.
ZyXEL G-2000 Plus v2 User's Guide
69