Pptp Encapsulation; Table 97 Fields In Menu 11.1 (Pppoe Encapsulation Specific) - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

Table 97 Fields in Menu 11.1 (PPPoE Encapsulation Specific)

FIELD
Service Name
Authen
Telco Option
Allocated Budget The field sets a ceiling for outgoing call time for this remote node. The default for
Period(hr)
Schedules
Nailed-Up
Connection
Session Options
Idle Timeout

24.2.3 PPTP Encapsulation

If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen.
Please see the appendix for information on PPTP.
Chapter 24 Remote Node Configuration
DESCRIPTION
If you are using PPPoE encapsulation, then type the name of your PPPoE service
here. Only valid with PPPoE encapsulation.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
• CHAP/PAP - Your ZyXEL device will accept either CHAP or PAP when
requested by this remote node.
• CHAP- accept CHAP only.
• PAP- accept PAP only.
this field is 0 meaning no budget control.
This field is the time period that the budget should be reset. For example, if we are
allowed to call this remote node for a maximum of 10 minutes every hour, then the
Allocated Budget is (10 minutes) and the Period(hr) is 1 (hour).
You can apply up to four schedule sets here. For more details please refer to the
Call Schedule Setup chapter.
This field specifies if you want to make the connection to this remote node a nailed-
up connection. More details are given earlier in this section.
Type the length of idle time (when there is no traffic from the ZyXEL device to the
remote node) in seconds that can elapse before the ZyXEL device automatically
disconnects the PPPoE connection. This option only applies when the ZyXEL
device initiates the call.
ZyXEL G-2000 Plus v2 User's Guide
267