Wpa-Psk/Wpa2-Psk; Figure 40 Wireless: Wpa-Psk/Wpa2-Psk - ZyXEL Communications p-334whd User Manual

P-334WHD User's Guide
Table 32 Wireless: Static WEP Encryption
LABEL
Key 1 to Key 4
Apply
Reset

4.3.3 WPA-PSK/WPA2-PSK

Click Network > Wireless LAN to display the General screen.

Figure 40 Wireless: WPA-PSK/WPA2-PSK

78
DESCRIPTION
The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
If you chose 256-bit WEP, then enter 29 ASCII characters or 58 hexadecimal
characters ("0-9", "A-F").
You must configure at least one key, only one key can be activated at any one time.
The default key is key 1.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to reload the previous configuration for this screen.
Chapter 4 Wireless LAN