Configuring Wan Ip - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

Table 36 PPTP Encapsulation
LABEL
My IP Subnet Mask
Server IP Address
Connection ID/Name
Apply
Reset

7.3 Configuring WAN IP

To change your ZyXEL device's WAN IP settings, click WAN, then the WAN IP tab. This
screen varies according to the type of encapsulation you select.
If your ISP did not assign you a fixed IP address, click Get automatically from ISP,
otherwise click Use fixed IP Address and enter the IP address in the field provided.
Chapter 7 WAN
DESCRIPTION
Your ZyXEL device will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the ZyXEL device.
Type the IP address of the PPTP server.
Type your identification name for the PPTP server.
Click Apply to save your changes back to the ZyXEL device.
Click Reset to begin configuring this screen afresh.
ZyXEL G-2000 Plus v2 User's Guide
107