Log Command Example - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

ZyXEL G-2000 Plus v2 User's Guide

Log Command Example

This example shows how to set the
results.
398
ZyXEL device
ras> sys logs load
ras> sys logs category error 3
ras> sys logs save
ras> sys logs display access
# .time
notes
message
0|11/11/2002 15:10:12 |172.22.3.80:137
|172.22.255.255:137
Firewall default policy: UDP(set:8)
1|11/11/2002 15:10:12 |172.21.4.17:138
|172.21.255.255:138
Firewall default policy: UDP(set:8)
2|11/11/2002 15:10:11 |172.17.2.1
|ACCESS BLOCK
Firewall default policy: IGMP(set:8)
3|11/11/2002 15:10:11 |172.22.3.80:137
|172.22.255.255:137
Firewall default policy: UDP(set:8)
4|11/11/2002 15:10:10 |192.168.10.1:520
|192.168.10.255:520
Firewall default policy: UDP(set:8)
5|11/11/2002 15:10:10 |172.21.4.67:137
|172.21.255.255:137
to record the error logs and alerts and then view the
source
|ACCESS BLOCK
|ACCESS BLOCK
|ACCESS BLOCK
|ACCESS BLOCK
|ACCESS BLOCK
destination
|224.0.1.60