Call Control Support; Figure 197 Menu 24 System Maintenance; Figure 198 Valid Ci Commands - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

ZyXEL G-2000 Plus v2 User's Guide

Figure 197 Menu 24 System Maintenance

Figure 198 Valid CI Commands

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
G-2000PLU> ?
Valid commands are:
sys
poe
ip
radius
G-2000PLU>

34.2 Call Control Support

The ZyXEL device provides two call control functions: budget management and call history.
Please note that this menu is only applicable when Encapsulation is set to PPPoE in menu 4
or menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of
the ZyXEL device within certain times. When the total outgoing call time exceeds the limit,
the current call will be dropped and any future outgoing calls will be blocked.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 — System
Maintenance — Call Control, as shown in the next table.
348
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
exit device
pptp config
ppp bridge
8021x radserv
ether
wlan
certificates
Chapter 34 System Maintenance and Information