Chapter 20 General Setup; General Setup; Procedure To Configure Menu 1 - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

The chapter shows you the information on general setup.

20.1 General Setup

Menu 1 — General Setup contains administrative and system-related information (shown
next). The System Name field is for identification purposes. However, because some ISPs
check this name you should enter your computer's "Computer Name".
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification
tab, note the entry for the Computer name field and enter it as the ZyXEL device System
Name.
In Windows 2000 click Start, Settings, Control Panel and then double-click System. Click
the Network Identification tab and then the Properties button. Note the entry for the
Computer name field and enter it as the ZyXEL device System Name.
In Windows XP, click start, My Computer, View system information and then click the
Computer Name tab. Note the entry in the Full computer name field and enter it as the
ZyXEL device System Name.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. While you
must enter the host name (System Name) on each individual computer, the domain name can
be assigned from the ZyXEL device via DHCP.

20.1.1 Procedure To Configure Menu 1

Enter 1 in the Main Menu to open Menu 1 – General Setup as shown next.

Chapter 20 General Setup

ZyXEL G-2000 Plus v2 User's Guide
C
H A P T E R
General Setup
2 0
241