Basic Setup Complete; Table 95 New Fields In Menu 4 (Pppoe) Screen - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

Table 95 New Fields in Menu 4 (PPPoE) screen

FIELD
Encapsulation
Idle Timeout
If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu
11 and enter the PPPoE service name provided to you in the Service Name field.

23.5 Basic Setup Complete

Well done! You have successfully connected, installed and set up your ZyXEL device to
operate on your network as well as access the Internet.
Note: When the firewall is activated, the default policy allows all communications to
the Internet that originate from the LAN, and blocks all traffic to the LAN that
originates from the Internet.
You may deactivate the firewall in menu 21.2 or via the ZyXEL device embedded web
configurator. You may also define additional firewall rules or modify existing ones but please
exercise extreme caution in doing so. See the chapters on firewall for more information on the
firewall.
Chapter 23 Internet Access
DESCRIPTION
Press [SPACE BAR] and then press [ENTER] to choose PPPoE. The
encapsulation method influences your choices in the IP Address field.
This value specifies the time in seconds that elapses before the ZyXEL device
automatically disconnects from the PPPoE server.
ZyXEL G-2000 Plus v2 User's Guide
261