Configuring Ftp; Figure 70 Remote Management: Ftp; Table 57 Remote Management: Ftp - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

Table 56 Remote Management: Telnet
LABEL
Apply
Reset

13.4 Configuring FTP

You can upload and download the ZyXEL device's firmware and configuration files using
FTP, please see the chapter on firmware and configuration file maintenance for details. To use
this feature, your computer must have an FTP client.
To change your ZyXEL device's FTP settings, click REMOTE MGMT, then the FTP tab.
The screen appears as shown.

Figure 70 Remote Management: FTP

The following table describes the labels in this screen.

Table 57 Remote Management: FTP

LABEL
Server Port
Server Access
Secured Client IP
Address
Chapter 13 Remote Management Screens
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL device using this service.
Select All to allow any computer to access the ZyXEL device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL device using this service.
ZyXEL G-2000 Plus v2 User's Guide
DESCRIPTION
171