Configuring Ip Alias; Figure 21 Static Dhcp; Table 20 Static Dhcp - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual
4-port wireless router
Hide thumbs
Also See for ZyAir G-2000 PlusV2:
- Quick start manual (13 pages) ,
- Declaration of conformity (1 page) ,
- Release note (10 pages)
Table of Contents
Advertisement
Figure 21 Static DHCP
The following table describes the labels in this screen.
Table 20 Static DHCP
LABEL
#
MAC Address
IP Address
Apply
Reset
5.6 Configuring IP Alias
IP Alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The ZyXEL device supports three logical LAN interfaces via its
single physical Ethernet interface with the ZyXEL device itself as the gateway for each LAN
network.
To change your ZyXEL device's IP Alias settings, click LAN, then the IP Alias tab. The
screen appears as shown.
Chapter 5 LAN Screens
DESCRIPTION
This is the index number of the Static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
Type the LAN IP address in this field.
Click Apply to save your changes back to the ZyXEL device.
Click Reset to begin configuring this screen afresh.
ZyXEL G-2000 Plus v2 User's Guide
79
Advertisement
Table of Contents
Troubleshooting
