Table 106 Menu 15.3 Trigger Port Setup - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

ZyXEL G-2000 Plus v2 User's Guide

Table 106 Menu 15.3 Trigger Port Setup

FIELD
Rule
Name
Incoming
Start Port
End Port
Trigger
Start Port
End Port
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC]
at any time to cancel.
294
DESCRIPTION
This is the rule index number.
Enter a unique name for identification purposes. You may enter up to 15 characters in
this field. All characters are permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The ZyXEL device forwards the traffic with this port (or range
of ports) to the client computer on the LAN that requested the service.
Enter a port number or the starting port number in a range of port numbers.
Enter a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the ZyXEL
device to record the IP address of the LAN computer that sent the traffic to a server on
the WAN.
Enter a port number or the starting port number in a range of port numbers.
Enter a port number or the ending port number in a range of port numbers.
Chapter 27 Network Address Translation (NAT)