Wpa-Psk/Wpa2-Psk; Figure 38 Network > Wireless Lan > General: Wpa-Psk/Wpa2-Psk; Table 30 Network > Wireless Lan > General: Wpa-Psk/Wpa2-Psk - ZyXEL Communications NBG334S User Manual

5.5.3 WPA-PSK/WPA2-PSK

Click Network > Wireless LAN to display the General screen. Select WPA-PSK or WPA2-
PSK from the Security Mode list.
Figure 38 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL
WPA Compatible
Pre-Shared Key
ReAuthentication
Timer (in
seconds)
Idle Timeout
NBG334S User's Guide
DESCRIPTION
This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the NBG334S even when the NBG334S is using WPA2-PSK or
WPA2.
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK
are the same. The only difference between the two is that WPA-PSK/WPA2-PSK
uses a simple common password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
The NBG334S automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the
username and password again before access to the wired network is allowed. The
default time interval is 3600 seconds (or 1 hour).
Chapter 5 Wireless LAN
79