Troubleshooting Your System; Safety First-For You And Your System; Troubleshooting System Startup Failure; Troubleshooting External Connections - Dell PowerEdge E06S Series Hardware Owner's Manual

Troubleshooting Your System

Safety First—For You and Your System
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.

Troubleshooting System Startup Failure

If your system halts during startup prior to video imaging or LCD messaging,
especially after installing an operating system or reconfiguring your system's
hardware, check for the following conditions:
• If you boot the system to the BIOS boot mode after installing an operating
system from the UEFI Boot Manager, the system will hang. The reverse is
also true. You must boot to the same boot mode in which you installed the
operating system. See "Using the System Setup Program and UEFI Boot
Manager" on page 63.
• Invalid memory configurations could cause the system to halt at startup
without any video output. See "System Memory" on page 91.
For all other startup issues, note the LCD panel messages and any system
messages that appear onscreen. See "LCD Status Messages" on page 23 and
"System Messages" on page 41 for more information.

Troubleshooting External Connections

Ensure that all external cables are securely attached to the external
connectors on your system before troubleshooting any external devices. See
Figure 1-1 and Figure 1-3 for the front- and back-panel connectors on your
system.
Troubleshooting Your System
173