Installing A Cooling Fan - Dell PowerEdge E06S Series Hardware Owner's Manual

Figure 3-16. Removing and Installing a Cooling Fan
1 release tab (2)
3 cooling fan assembly

Installing a Cooling Fan

CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Align the connector on the fan with the connector on the system board.
2 Lower the fan into the fan assembly until the release tabs snap into place.
See Figure 3-16.
3 Close the system. See "Closing the System" on page 90.
2 cooling fan
Installing System Components
1
2
3
117