Cooling Fans; Removing A Cooling Fan - Dell PowerEdge E06S Series Hardware Owner's Manual

Cooling Fans

Your system contains six single-rotor hot-swappable fans to provide cooling
for the processors, expansion cards, and memory modules.
NOTE:
In the event of a problem with a particular fan, the fan number is referenced
by the system's management software, allowing you to easily identify and replace
the proper fan by noting the fan numbers on the fan assembly.

Removing a Cooling Fan

WARNING:
powered down. Allow time for the fan to stop spinning before removing it from
the system.
WARNING:
the cover.
CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
NOTE:
The procedure for removing each individual fan module is the same.
1 Open the system. See "Opening the System" on page 89.
2 Press the release tabs toward each other and lift the fan out of the fan
assembly. See Figure 3-16.
116
Installing System Components
The cooling fan can continue to spin for some time after it has been
Do not attempt to operate the system without the cooling fans or
Many repairs may only be done by a certified service technician.