Installing A Memory Riser - Dell PowerEdge E06S Series Hardware Owner's Manual

Figure 3-7. Removing and Installing a Memory Riser
1
5
1 handle
3 release button
5 memory-riser connector

Installing a Memory Riser

1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 89.
3 If applicable, remove the memory-riser blank. See "Removing a Memory-
Riser Blank" on page 99.
CAUTION:
Before installing the memory riser, you must ensure that the memory
module socket ejectors are in the locked position.
2 memory riser
4 card guide
Installing System Components
2
3
4
101