Processor Settings Screen - Dell PowerEdge E06S Series Hardware Owner's Manual

Processor Settings Screen

Option
64-bit
Core Speed
Bus Speed
Logical Processor
(Enabled default)
Virtualization Technology
(Disabled default)
Adjacent Cache Line
Prefetch
(Enabled default)
Hardware Prefetcher
(Enabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
Turbo Mode
C1E
(Enabled default)
C States
Processor Family-Model-
Stepping
68
Using the System Setup Program and UEFI Boot Manager
Description
Specifies if the processor(s) support 64-bit extensions.
Displays the processor clock speed.
Displays the processor bus speed.
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Enable or disables system optimization for sequential
memory access.
Enables or disables the hardware prefetcher.
Enables or disables Execute Disable Memory Protection
Technology.
If set to All, the maximum number of cores in each
processor is enabled.
If Turbo Boost Technology is supported by the
processor(s), enables or disables Turbo Mode.
When set to Enabled, the processor can switch to a
minimum performance state when idle.
When set to Enabled, the processor(s) can operate in all
available power states.
Displays the family, model, and stepping of the selected
processor.