Bulbs; Replacing The Dashboard Bulbs - APRILIA RSV 1000 R FACTORY Manual

BULBS

R e a d p a g e 5 9 ( M A I N T E N A N C E )
carefully.
WARNING
Fire hazard!
Keep fuel and other flammable products
away from electric components.
CAUTION
Before proceeding to change a bulb, set
the ignition switch to "" and allow
some time for the bulb to cool down.
Wear clean gloves or use a clean, dry
cloth to handle bulbs. Do not leave your
fingerprints on a bulb, as this may
cause overheating leading to failure.
If you touch a bulb with your fingers,
remove any fingerprints with alcohol to
avoid early failure.
DO NOT PULL ON THE WIRING.
NOTE
Check the fuses, see page 102
( R E P L A C I N G T H E F U S E S ) b e f o r e
changing a bulb.
REPLACING THE DASHBOARD
BULBS
If you need assistance or technical advice,
contact your Official dealer, for
aprilia
guaranteed accurate, prompt service.
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
105