Figure 337 Base Profiles; Figure 338 Anti-X > Adp > Profile; Profile Summary Screen; Table 141 Base Profiles - ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User Manual

Figure 337 Base Profiles

These are the default base profiles at the time of writing.

Table 141 Base Profiles

BASE PROFILE
all
none

30.6 Profile Summary Screen

Select Anti-X > ADP > Profile. Use this screen to:
• Add a new profile
• Edit an existing profile
• Delete an existing profile
Figure 338 Anti-X > ADP > Profile
The following table describes the fields in this screen.
Table 142 Anti-X > ADP > Profile
LABEL
Name
ZyWALL 1050 User's Guide
DESCRIPTION
All traffic anomaly and protocol anomaly rules are enabled. Rules with a high or
severe severity level (greater than three) generate log alerts and cause packets
that trigger them to be dropped. Rules with a very low, low or medium severity
level (less than or equal to three) generate logs (not log alerts) and no action is
taken on packets that trigger them.
All traffic anomaly and protocol anomaly rules are disabled. No logs are
generated nor actions are taken.
DESCRIPTION
This is the name of the profile you created.
Chapter 30 ADP
445