Figure 163 Network > Virtual Server; Table 79 Network > Virtual Server - ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User Manual

Figure 163 Network > Virtual Server
The following table describes the labels in this screen. See
for more information as well.
Table 79 Network > Virtual Server
LABEL
Total Virtual
Servers
entries per page
Page x of x
#
Name
Interface
Original IP
Mapped IP
Protocol
Original Port
Mapped Port
Add icon
ZyWALL 1050 User's Guide
DESCRIPTION
This is how many virtual server entries are configured in the ZyWALL.
Select how many virtual server entries to display per page in the screen.
This is the number of the page of entries currently displayed and the total number
of pages of entries. Type a page number to go to or use the arrows to navigate the
pages of entries.
This field is a sequential value, and it is not associated with a specific virtual server.
This field displays the name of the virtual server.
This field displays the interface on which packets for the virtual server were
received.
This field displays the original destination IP address (or address object) of packets
for the virtual server. It displays any if there is no restriction on the original
destination IP address.
This field displays the new destination IP address for the packet.
This field displays the service used by the packets for this virtual server. It displays
any if there is no restriction on the services.
This field displays the original destination port(s) of packets for the virtual server.
This field is blank if there is no restriction on the original destination port.
This field displays the new destination port(s) for the packet. This field is blank if
there is no restriction on the original destination port.
This column provides icons to add, edit, and remove virtual servers. In addition, you
can activate and deactivate virtual servers.
To add a virtual server, click the Add icon at the top of the column. The Virtual
Server Add/Edit screen appears.
To activate / deactivate a virtual server, click the Active icon next to the virtual
server.
To edit a virtual server, click the Edit icon next to the virtual server. The Virtual
Server Add/Edit screen appears.
To delete a virtual server, click on the Remove icon next to the virtual server. The
web configurator confirms that you want to delete it before doing so.
Chapter 16 Virtual Servers
Section 16.4.1 on page 254 below
253