Figure 136 Network > Interface > Pppoe/Pptp; Table 59 Network > Interface > Pppoe/Pptp - ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User Manual

Chapter 10 Interface
10.6.3 PPPoE/PPTP Interface Summary
You have to set up an ISP account before you create a PPPoE/PPTP
interface.
This screen lists every PPPoE/PPTP interface. To access this screen, click Network >
Interface > PPPoE/PPTP.
Figure 136 Network > Interface > PPPoE/PPTP
Each field is described in the table below.
Table 59 Network > Interface > PPPoE/PPTP
LABEL
#
Name
Base Interface
Account Profile
Add icon
Apply
Reset
208
DESCRIPTION
This field is a sequential value, and it is not associated with any interface.
This field displays the name of the interface.
This field displays the interface on the top of which the PPPoE/PPTP interface
is.
This field displays the ISP account used by this PPPoE/PPTP interface.
This column lets you create, edit, remove, activate, deactivate, connect and
disconnect interfaces.
To create an interface, click the Add icon at the top of the column. The PPPoE/
PPTP Interface Add/Edit screen appears.
To edit an interface, click the Edit icon next to it. The PPPoE/PPTP Interface
Add/Edit screen appears.
To remove an interface, click the Remove icon next to it. The ZyWALL confirms
you want to remove it before doing so.
To activate or deactivate an interface, click the Active icon next to it. Make sure
you click Apply to save and apply the change.
To connect or disconnect an interface, click the Connect icon next to it. You
might use this icon to test the interface or to manually establish the connection
for a Dial-on-Demand PPPoE/PPTP interface.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 1050 User's Guide