Figure 16 Internet Access: Step 1
The following table describes the labels in this screen.
Table 7 Internet Access: Step 1
LABEL
ISP Parameters
Encapsulation
WAN IP Address
Assignments
WAN Interface
Zone
IP Address
Assignment
Next
4.3 Step 1 Internet Access
Encapsulation: Choose the Ethernet option when the WAN port is used as a regular
Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection according to the
information from your ISP.
WAN Interface: This is the interface you are configuring for Internet access.
Zone: Select the security zone to which you want this interface and Internet connection to
belong.
ZyWALL 1050 User's Guide
DESCRIPTION
Choose the Ethernet option when the WAN port is used as a regular Ethernet.
Otherwise, choose PPPoE or PPTP for a dial-up connection according to the
information from your ISP.
This is the interface you are configuring for Internet access.
Select the security zone to which you want this interface and Internet connection to
belong.
Select Auto If your ISP did not assign you a fixed IP address.
Select Static If the ISP assigned a fixed IP address.
Click Next to continue.
Chapter 4 Wizard Setup
75