Table of Contents
Advertisement
Chapter 4 Wizard Setup
Figure 41 VPN Advanced Wizard: Step 5
The following table describes the labels in this screen.
Table 21 VPN Advanced Wizard: Step 5
LABEL
Summary
Name
Secure
Gateway
Pre-Shared
Key
Local Policy This is a (static) IP address and Subnet Mask on the LAN behind your ZyWALL.
Remote
Policy
Remote
Gateway CLI
Save
4.8.8 VPN Advanced Wizard - Summary
This summary of VPN tunnel settings is read-only.
Name: Identifies the VPN connection (and the VPN gateway).
106
DESCRIPTION
This is the name of the VPN connection (and VPN gateway).
This is the WAN IP address or domain name of the remote IPSec router. If this field
displays 0.0.0.0, only the remote IPSec router can initiate the VPN connection.
This is a pre-shared key identifying a communicating party during a phase 1 IKE
negotiation.
This is a (static) IP address and Subnet Mask on the network behind the remote
IPSec router.
These commands set the matching VPN connection settings for the remote gateway.
If the remote gateway is a ZLD-based ZyWALL, you can copy and paste this list into
its command line interface in order to configure it for the VPN tunnel.
You can also use a text editor to save these commands as a shell script file with a
".zysh" filename extension. Then you can use the file manager to run the script in
order to configure the VPN connection.
See the commands reference guide for details on the commands displayed in this
list.
Click Save to store the VPN settings on your ZyWALL.
ZyWALL 1050 User's Guide
Advertisement
Table of Contents
Troubleshooting
