Table 83 Network > Alg - ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User Manual

Chapter 18 ALG
The following table describes the labels in this screen.
Table 83 Network > ALG
LABEL
Enable SIP
Transformations
SIP Signaling
Port
Additional SIP
Signaling port
(UDP) for
transformations
SIP Media
inactivity time
out
SIP Signaling
inactivity time
out
Enable H.323
transformations
H.323 Signaling
Port
Additional H.323
Signaling port
for
transformations
Enable FTP
Transformations
FTP Signaling
Port
Additional FTP
Signaling port
for
transformations
Apply
Cancel
266
DESCRIPTION
SIP is a signaling protocol used in VoIP (Voice over IP), the sending of voice signals
over Internet Protocol. Turn on the SIP ALG to allow SIP sessions to pass through
the ZyWALL.
Using the SIP ALG allows you to use bandwidth management on SIP traffic.
If you are using a custom UDP port number (not 5060) for SIP traffic, enter it here.
If you are also using SIP on an additional UDP port number, enter it here.
Use this field to set how many seconds (1~86400) the ZyWALL will allow a SIP
session to remain idle (without voice traffic) before dropping it.
If no voice packets go through the SIP ALG before the timeout period expires, the
ZyWALL deletes the audio session. You cannot hear anything and you will need to
make a new call to continue your conversation.
Most SIP clients have an "expire" mechanism indicating the lifetime of signaling
sessions. The SIP user agent sends registration packets to the SIP server
periodically and keeps the session alive in the ZyWALL.
If the SIP client does not have this mechanism and makes no calls during the
ZyWALL SIP timeout, the ZyWALL deletes the signaling session after the timeout
period. Enter the SIP signaling session timeout value (1~86400).
H.323 is a protocol used for audio communications over networks.
Select this check box to turn on the H.323 ALG to allow H.323 sessions to pass
through the ZyWALL.
Using the H.323 ALG allows you to use bandwidth management on H.323 traffic.
If you are using a custom TCP port number (not 1720) for H.323 traffic, enter it here.
If you are also using H.323 on an additional TCP port number, enter it here.
Select this check box to allow FTP sessions to pass through the ZyWALL. FTP (File
Transfer Program) is a program that enables fast transfer of files, including large
files that may not be possible by e-mail.
Using the FTP ALG allows you to use bandwidth management on FTP traffic.
If you are using a custom TCP port number (not 21) for FTP traffic, enter it here.
If you are also using FTP on an additional TCP port number, enter it here.
Click Apply to save your changes back to the ZyWALL.
Click Cancel to begin configuring this screen afresh.
ZyWALL 1050 User's Guide