Figure 18 Ethernet Encapsulation: Static; Table 8 Ethernet Encapsulation: Static - ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User Manual

Figure 18 Ethernet Encapsulation: Static

The following table describes the labels in this screen.

Table 8 Ethernet Encapsulation: Static

LABEL
ISP Parameters
Encapsulation
WAN IP Address
Assignments
WAN Interface
Zone
IP Address
IP Subnet Mask
Gateway IP
Address
First DNS Server
Second DNS
Server
Next
The ZyWALL applies the configuration settings.
ZyWALL 1050 User's Guide
DESCRIPTION
This displays the type of Internet connection you are configuring.
This displays the identity of the interface you configure to connect with your ISP.
This field displays to which security zone this interface and Internet connection will
belong.
Enter the IP address that your ISP gave you. This should be a static, public IP
address.
Enter the subnet mask for the IP address.
Enter the IP address of the router through which this WAN connection will send
traffic (the default gateway).
DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. The DNS server is extremely important because without
it, you must know the IP address of a computer before you can access it. The
ZyWALL uses a system DNS server (in the order you specify here) to resolve
domain names for VPN, DDNS and the time server.
Enter the DNS server IP addresses.
Click Next to continue.
Chapter 4 Wizard Setup
77