Table of Contents
Advertisement
The ZyWALL's firmware package cannot go through the ZyWALL when you enable the anti-
virus Destroy compressed files that could not be decompressed option. The ZyWALL
classifies the firmware package as not being able to be decompressed and deletes it. You can
upload the firmware package to the ZyWALL with the option enabled, so you only need to
clear the Destroy compressed files that could not be decompressed option while you
download the firmware package. See
Destroy compressed files that could not be decompressed option.
The firmware update can take up to five minutes. Do not turn off or reset the
ZyWALL while the firmware update is in progress!
The ZyWALL automatically reboots after a successful upload.
Figure 458 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 217 Maintenance > File Manager > Firmware Package
LABEL
Boot
Module
Current
Version
Released
Date
File Path
Browse...
Upload
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyWALL again.
ZyWALL 1050 User's Guide
DESCRIPTION
This is the version of the boot module that is currently on the ZyWALL.
This is the firmware version and the date created.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
Section 28.3.1 on page 404
Chapter 45 File Manager
for more on the anti-virus
615
Advertisement
Table of Contents
Troubleshooting
