Figure 73 Device Ha > Synchronize; Table 33 User-Aware Access Control Example; User-Aware Access Control - ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User Manual

Chapter 6 Tutorials
6.3.7 Synchronize the Backup
1 Connect the backup to the same network as the master.
2 Click Device HA > Synchronize.
3 Type the password for synchronization in the Password field. Enter the IP address of the
master (on a secure network), and click Sync Now to get the configuration from the
master.
Figure 73 Device HA > Synchronize
You can also set up the backup to synchronize with the master at regular intervals.

6.4 User-Aware Access Control

You can configure many policies and security settings for specific users or groups of users.
This is illustrated in the following example, where you will set up the following policies. This
is a simple example that does not include priorities for different types of traffic. See
27.4 on page 376

Table 33 User-Aware Access Control Example

GROUP (USER)
Finance (Leo)
Engineer (Steven)
Sales (Debbie)
Boss (Andy)
Guest (guest)
Others
The users are authenticated by an external RADIUS server at 192.168.1.200.
First, set up the user accounts and user groups in the ZyWALL. Then, set up user
authentication using the RADIUS server. Finally, set up the policies in the table above.
The ZyWALL has its default settings.
138
for more on bandwidth management.
WEB
WEB SURFING
BANDWIDTH
Yes 200K
Yes 100K
Yes 100K
Yes 100K
Yes 50K
No ---
LAN-TO-DMZ
MSN
ACCESS
No Yes
No No
Yes (M-F, Yes
08:30~18:00)
Yes Yes
No No
No No
ZyWALL 1050 User's Guide
Section