Ipv4 Ping Test - ZyXEL Communications GS1900-8 User Manual

Figure 215 Maint enance > Diagnost ics > Port Test
Follow t he st eps t o perform t he port t est .
1. I n Por t Te st , select t he port num ber from t he Por t drop- down list .
2. Click Te st t o st art t he port t est .
The t est result s are displayed in Te st Re sult s.

32.7.2 IPv4 Ping Test

Click M a int e na nce > D ia gnost ics > PI N G > I Pv4 in t he navigat ion panel t o open t his screen.
Use t his screen t o ping an I Pv4 server.
Figure 216 Maint enance > Diagnost ics > PI NG > I Pv4
The following t able describes t he labels under Pin g Te st .
Table 182 Maint enance > Diagnost ics > PI NG > I Pv4
LABEL
I P Address
Count
I nt erval
Size
Chapter 32 Maintenance
DESCRIPTION
Ent er t he address of t he t arget host server.
Ent er t he num ber of ping packet s t o send. The range is 1 t o 5 packet s; t he default count is
4.
Ent er t he t im e in seconds bet ween sending ping packet s. The range is 1 t o 5 seconds; t he
default is 1 second.
Ent er t he individual packet size in byt es. The range is 8 t o 5120 byt es; t he default is 56
byt es.
GS1900 Series User's Guide
220