Section 5. Programming Reference
COMMAND DEFAULT SETTINGS
There are some types of commands that must have a value specified before a label
can be printed. If the data stream does not contain these commands, a "default" value
is assumed. The commands and the corresponding default values are:
COMMAND
Print Rotation
Vertical Reference Point
Horizontal Reference Point
Character Pitch
Base Reference Point
Character Expansion
Print Darkness
Print Darkness (M-8459Se)
Print Speed
Print Speed (M-8459Se)
NOTES:
(1) The settings for these commands will revert to the default value when the printer
receives an <ESC>Z or an <ESC>*.
(2) These values transmitted with these commands will remain in effect until a new
command is received.
Page 5-8
Original
H = 200
Base
Reference
Point
V = 800
"%1"
DEFAULT
H=1, V=1
PN 9001073 Rev C
Label Feed
Direction
NOTE
0°
(1)
0
(1)
0
(1)
2
(1)
(2)
1
(1)
2
(1)
3
(1)
6 ips
(2)
4 ips
(2)
SATO "Se" Print Engines