Section 2. Installation; Introduction - SATO M-8485Se Operator And Technical Reference Manual

INTRODUCTION

This section of the manual has been written to help you install the SATO "Se" print
engine modules and to get started as quickly as possible.
It is recommend to read each chapter in this manual before the installation or the use
of the print modules.
INSTALLATION
Careful consideration must be given when selecting the location of the printer,
especially to environmental considerations. To obtain optimum results from the SATO
"S" print module, always try to avoid operation locations influenced by:
Direct or bright sunlight, as this will make the label sensor less responsive
and may cause the label to be sensed incorrectly.
Locations which have extremes of temperature, as this can create electrical
problems on the circuits within the printer.
The installed location of the printer should ideally be in areas free from
dust, humidity and sudden vibrations.
CONSUMABLES
Always use SATO carbon ribbons or equivalent in the thermal transfer models. The
use of incorrect materials may cause malfunctions of the printer and void the
warranty.
SATO "Se" Print Engines
SECTION 2.
INSTALLATION
PN 9001073 Rev C
Page 2-1