Default Settings Mode - SATO LT408 Operator's Manual

DEFAULT SETTING MODE
Figure 5-15 provides the specific sequence of events required by the operator, the printer, and the printer's
software to return the printer to the configuration state as received from the factory. Use the keys on the printer's
operator panel to select and enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
Lt408 Operator Manual
Unit 4: Printer Configuration
Press and hold the following keys:
CANCEL + POWER
DEFAULT MODE
PRINTER SETTING
ALT. PROTOCOL
Printer Set Alt. Protocol
ENTER ENTER
DEFAULT DEFAULT
PRINTER SETTING ALT. PROTOCOL
YES NO
Yes
ENTER
DEFAULT SETTING
COMPLETED
PLEASE POWER OFF
Printer
waiting to be
powered off.
POWER
Figure 4-15, Default Setting Mode
4-17
YES NO
No
ENTER
PN: 9001152A