Clear Expanded Memory - SATO M-8485Se Operator And Technical Reference Manual

Section 5. Programming Reference
Expanded Memory Function

Clear Expanded Memory

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 5-82
<ESC>*a,bbb
a = Memory card section to be cleared
G To clear SATO graphic files from memory card
P To clear PCX graphic files
F To clear formats from the memory card
O To clear TrueType fonts
R To clear BMP graphic files
bbb = Memory Card storage area to be cleared
001 to 999 for Graphics, PCX or Formats
000 to 099 for TrueType fonts
Example: <ESC>*G,01
Placement: This command should be sent to the printer
immediately following the <ESC>CC Memory Area
Select command.
Default: None
To clear individual memory areas in the Expanded Memory.
*O,09
There is no printer output as a result of this command.
1. To clear everything in the Expanded Memory, use the <ESC>BJF
Expanded Memory Initialize command.
2. This command is ignored if there is no data to be cleared.
3. This command is ignored if Expanded Memory is not installed in
the printer.
PN 9001073 Rev C
SATO "Se" Print Engines