Rotate, Fixed Base Reference Point - SATO M-8485Se Operator And Technical Reference Manual

Section 5. Programming Reference

Rotate, Fixed Base Reference Point

Command Structure
Command Function
Input to Printer
Printer Output
Page 5-70
<ESC>%a
a = 0 Sets print to normal direction
1 Sets print to 90°CCW
2 Sets print to 180° rotated (upside down)
3 Sets print to 270° CCW
Example: <ESC>%3
Placement: Preceding any printed data to be rotated
Default: <ESC>%0
To rotate the print direction in 90° increments without changing the
location of the base reference point. The diagram below illustrates the
use of the <ESC>% Rotate command. Note that the entire print area
is shown, but your label will probably not be as large as the entire
area.
%0
%1
%2
%3
PN 9001073 Rev C
SATO "Se" Print Engines