Normal Mode - SATO M-8485Se Operator And Technical Reference Manual

Section 3. Configuration

NORMAL MODE

The printer initially powers on in the ONLINE mode. The user can access the User
Settings using the following procedures.
V 05.00.03.00
INITIALIZING
ONLINE
QTY:000000
OFFLINE
PRINT DARKNESS
1(L)
PRINT SPEED
4 6
Page 3-10
Displays the firmware during the initialization.
The LCD will display the ONLINE status on the top line and
the bottom line will contain the label quantity (QTY) status.
The messsge will be changed to OFFLINE whenever the
printer is switched offline by pressing the LINE key. As soon a
print job is received, the quantily line will indicate the number
of labels to be printed. As soon as the label job begins to print,
the display will indicate the number of labels in the print job
that remains to be printed.
Press the LINE key once. When the display changes to
OFFLINE, press the FEED and LINE keys simultaneously for
000000
more than one second.
The LCD now displays the Print Darkness selections. The
current setting is indicated by a cursor over one of the range
2(M) 3(H)
settings. There are 3 possible selections (except for the
M-8459Se which has 5 possible selections). The lowest
setting represents the lightest print and the highest setting the
darkest print.
1. Press the LINE key to step the cursor to the desired setting.
2. Once the correct setting is underlined, press the FEED key
to accept the selection and step the display to the next
adjustment.
The print speed selections are dependent upon the printer
model. The current setting is indicated by the underline cursor.
8 10 12
1. Use the LINE key to step the cursor to the desired setting.
2. Once the correct setting is selected, press the FEED key to
accept the selection and step the display to the next
adjustment.
M-8459Se
9001073 Rev C
M-8485Se
2 ips 4 ips
3 ips 6 ips
4 ips 8 ips
5 ips 10 ips
12 ips
M-8460Se
M-8490Se
4 ips
6 ips
8 ips
SATO "Se" Print Engines