Hex Dump Mode - SATO M-8485Se Operator And Technical Reference Manual

HEX DUMP MODE

In addition to the Test Print Labels, the printer can print the contents of the receive
buffer in a hexadecimal format to allow the data stream to be examined for errors
and troubleshooting.
V 05.00.03.00
INITIALIZING
ONLINE
SATO "Se" Print Engines
Displays the firmware during the initialization.
The Hex Dump Mode is entered by placing DSW2-4 in the on
position and powering the printer on.
QTY:000000
1. The printer is now ready to receive data.
2. Send the data stream to the printer.
3. The received data will be printed in a hexadecimal format
4. To return the printer to normal operation, place DSW2-4 in
the off position and power the printer off and then back on.
9001073 Rev C
Section 3. Configuration
Page 3-27