SATO M-8485Se Operator And Technical Reference Manual page 227

LEGACY COMMANDS
These commands are provided for legacy applications that use command streams
created for older SATO printers. It is not recommended that these commands be used
for new applications.
AX Expanded Print Length. This command sets the printer to the
Expanded print length (14 inches). <ESC>EX0 is the recommended
replacement.
N Rotate, Moving Base Reference Point. Sets the original base
reference point and returns printing to normal orientation. <ESC>% is
the recommended replacement.
R Rotate, Moving Base Reference Point. Rotates the printing of all
subsequent images by 90 degrees counterclockwise each time it is
used. Also moves the base reference point. <ESC>% is the
recommended replacement.
Page A-13
Appendix A: Command Quick Reference
PN 9001073 Rev C
SATO "Se" Print Engines